Artillery SWX1 3D Printer Kit Self Assembly 300*300*400mm
Artillery SWX1 3D Printer Kit Self Assembly 300*300*400mm
Artillery SWX1 3D Printer Kit Self Assembly 300*300*400mm
Artillery SWX1 3D Printer Kit Self Assembly 300*300*400mm
Artillery SWX1 3D Printer Kit Self Assembly 300*300*400mm
Artillery SWX1 3D Printer Kit Self Assembly 300*300*400mm

Artillery SWX1 3D Printer Kit Self Assembly 300*300*400mm

Normaler Preis $399.99 Speichern $-399.99
10 auf Lager

Artillery SWX1 3D Printer Kit Self Assembly 300*300*400mm Low Noise Support Filament Run-out Detection.


Features:

  • For faster speed, the max print speed is 150 mm/s. Large build 300 * 300 * 400mm / 11.81 * 11.81 * 15.75in.

  • It has an Exclusive ultra-quiet stepper driver, low noise, and high performance. Support filament run-out detection and recovery, power loss detection and recovery.

  • Adopting rapid heating AC heat bed, direct drive extruder for better flexible filament support, and synchronized dual Z system.

  • Exclusive heat bed protection design. New lattice glass as 3D printer platform, extremely flat surface, superb adhesion, a breeze to release the printed objects, fast and heated curve, tested and durable flat.

  • Use flat cables, which are convenient and not easy to fray. Support soft printing materials with solid stability, such as TPU and TPE.

  • Color touchscreen, reset key set, easy to operate. All-in-one machine, 95% assembled, simple to install, 2 minutes to complete the installation, saving installation time.

Specifications:

  • Model: SWX1
  • Layer Resolution: 0.1mm
  • Frame: Aluminum Extrusion
  • SYZ Positioning Accuracy: 0.05mm, 0.05mm, 0.1mm
  • Printing Filament: PLA, ABS, TPU, TPE, Flexible Material
  • Filament Diameter: 1.75mm
  • Nozzle Diameter: 0.4mm
  • Maximum Print Speed:150 mm/s

  • Maximum Travel Speed: 250mm/s

  • Build : 300 * 300 * 400mm / 11.81 * 11.81 * 15.75in
  • Extruder Type: Extruder (direct drive)
  • Maximum Build Plate Temperature: 130℃
  • Power Requirement: /, 600W max (with the heated bed turned on)
  • Connectivity: USB, TF Card, USB Stick
  • Control Board: MKS Gen L
  • Nozzle Type:
  • USB Disk Capacity: 1GB
  • Machine Dimensions:
  • 550 * 405 * 640mm / 21.65 * 15.94 * 25.2in
  • 550 * 405 * 870mm / 21.65 * 15.94 * 34.25in (with spool holder)
  • Machine Weight: 14000g / 493.84oz
  • Package Size: 78 * 54 * 25cm / 30.71 * 21.26 * 9.84in.
  • Package Weight: 16500g / 582.02oz
  • Packing List: One 3D Printer DIY Kit

WARNING: This product can expose you to chemicals, including lead, known to the State of California to cause cancer and reproductive harm. For more information, go to. www.p65warnings.ca.gov

 
 
 
 
 






















Features:
Faster speed, the max print speed is 150 mm/s. Large build volume 300 * 300 * 400mm / 11.81 * 11.81 * 15.75in.
Exclusive ultra-quiet stepper driver, low noise, and high performance. Support filament run-out detection and recovery, power loss detection and recovery.
Adopting rapid heating AC heat bed, direct drive extruder for better flexible filament support, and synchronized dual Z system.
Exclusive heat bed protection design. New lattice glass as 3D printer platform, extremely flat surface, superb adhesion, a breeze to release the printed objects, fast and steady heated curve, tested and durable flat.
Using flat cables convenient and clean, not easy to be frayed. Support printing soft materials well with strong stability, such as TPU, and TPE.
Color touchscreen, reset key set, easy to operate. All-in-one machine, 95% assembled, simple to install, 2 minutes to complete the installation, saving installation time.


Specifications:
Model: SWX1
Layer Resolution: 0.1mm
Frame: Aluminum Extrusion
SYZ Positioning Accuracy: 0.05mm, 0.05mm, 0.1mm
Printing Filament: PLA, ABS, TPU, TPE, Flexible Material
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm
Maximum Print Speed:150 mm/s
Maximum Travel Speed: 250mm/s
Build Volume: 300 * 300 * 400mm / 11.81 * 11.81 * 15.75in
Extruder Type: Titan Extruder (direct drive)
Maximum Build Plate Temperature: 130℃
Power Requirement: 110V/220V, 600W max (with heated bed turned on)
Connectivity: USB, TF Card, USB Stick
Control Board: MKS Gen L
Nozzle Type: Volcano
USB Disk Capacity: 1GB
Machine Dimensions:
550 * 405 * 640mm / 21.65 * 15.94 * 25.2in
550 * 405 * 870mm / 21.65 * 15.94 * 34.25in (with spool holder)
Machine Weight: 14000g / 493.84oz
Package Size: 78 * 54 * 25cm / 30.71 * 21.26 * 9.84in
Package Weight: 16500g / 582.02oz


Packing List:
1 * 3D Printer Kit
1 * Tools Kits
1 * USB Disk(1GB)
1 * Plug